Hey there, I’m [Your Name], and I’ve been in the paper standee game for over 7 years now—seen every messy, rushed conference setup, every “wait, that standee won’t stand” panic, and every time a team cut corners and their display fell flat. If you’re reading this, chances are you’re gearing up for a conference, scrolling for a way to make a paper standee that actually works (and doesn’t look like a 2000s office party disaster). Let me break this down like we’re chatting over a coffee—not some stiff, “industry expert” script. Paper Standee

First off, let’s get one thing straight: paper standees aren’t just “big posters.” I’ve had clients come to me thinking they can just print a poster on cardstock, tape a stick to the back, and call it a day. Spoiler: that thing will tip over before the first attendee even walks by. A good conference paper standee needs three things: stability (no one wants a tripping hazard), eye-catching design (you need to stop people scrolling past your booth), and ease of setup (because you don’t want to spend 2 hours fidgeting with parts when you could be networking).
I’m not gonna lie—some people think making their own is cheaper, but let’s be real: a bad standee will get ignored, while a good one can turn casual browsers into leads. But if you’re set on DIY-ing (or if you just want to know what goes into a pro standee), I’ll walk you through the steps I give my own clients, minus the vendor markup.
Step 1: Pick the Right Base Material (This Is Non-Negotiable)
A lot of first-timers grab whatever cardstock is cheapest at the office supply store. Big mistake. For conferences, you need something that’s rigid enough to not bend when someone brushes it, but light enough to carry. Here’s the breakdown:
- Lightweight paper (100-130 GSM): Don’t even bother. This is for flyers, not something that’s gonna stand on its own. It’ll curl up faster than a wet napkin.
- Cardstock (250-300 GSM): This works for small, tabletop standees (12-18 inches tall). But if you’re doing a full-size standee (4-6 feet, standard for conferences), this might be too flimsy—especially if the venue has AC blowing or someone bumps it.
- Corrugated paper board (350-450 GSM): This is my go-to for full-size standees. It’s rigid, durable, and lightweight enough to ship (or tote) without breaking. Pro tip: Skip the glossy corrugated if your design has a lot of fine text—it can be hard to read in fluorescent conference lights. Matte corrugated is way better for readability, I’ve seen way more stands get noticed with matte.
Also, skip the “single-sided” mistake. If your standee is tall enough, some attendees will walk past it from both sides. I always tell people to print double-sided if your design is simple enough—no need for two separate standees, just flip it around.
Step 2: Design for Standee (Not Just a Poster)
I see so many designs that look great on a laptop, but terrible when blown up to 5 feet tall. Let’s fix that.
First, text size is king. Here’s a rule: any text on your standee should be at least 72 points. If you can’t read it from 3 feet away on your screen, it won’t matter when it’s blown up. No tiny bullet points, no fancy script fonts—stick to sans-serif fonts like Arial, Helvetica, or Montserrat. They’re clean, easy to read from a distance, and won’t get lost when the standee is standing across the room.
Next, keep it simple. You don’t need 10 logos, 5 headlines, and a free offer buried at the bottom. Conferences are chaotic—attendees have 100 stands to check out. Your standee should have 1 main headline (something like “We Cut Your Workweek by 20 Hours”), 1 small subhead (a line explaining what you do), and 1 clear call-to-action (like “Scan Here for a Free Demo” or “Stop By Booth 123”). Any extra clutter will make people glance away.
Also, test your design in the venue’s lighting. Most conference halls have harsh fluorescent lights—they wash out bright colors, but make dark colors look muddy. If you’re designing at home under warm light, your bright red might look pink in the hall. I suggest printing a test small version (like 8×10) and holding it under a similar light if you can, or increasing the brightness a little in your design software.
Step 3: Build the Stand Mechanism (Stability = No Embarrassing Falls)
This is where 90% of DIY standees fail. You can have the best design in the world, but if it falls over, no one’s stopping. There are two main types of stands, depending on your size:
- H-style stand (for 4-6 feet tall standees): This is the most common conference stand. It’s two plastic or metal legs that slide into slots at the bottom of the stand. But here’s a pro tip for DIY: don’t use flimsy plastic legs. If you can, cut two thin wooden dowels (about 1 inch thick) to the height of the bottom of your stand, and glue them into slots you cut with a box cutter. Add a small weight to the bottom of the legs—like a few coins taped inside, or a heavy plastic base—to keep it from tipping if someone bumps it. I once had a client whose stand tipped over because they forgot the weight; it landed right on a attendee’s laptop, and we didn’t get that lead. Oops.
- T-style stand (for shorter standees, 1-3 feet): This is a single center pole that goes from the bottom of the stand up to a horizontal support at the top. These are more stable for small tables, but again, weight is key. If you’re making your own, cut the pole from a PVC pipe and fill the bottom end with sand or rice before sealing it. That will keep it from wobbling.
Wait—what about self-standing stands with no legs? Those are usually for display boards, not paper standees. They’re too flimsy, trust me. Save yourself the headache and go with legs.
Also, don’t forget to leave a margin for the stand slots. If you’re designing the standee, make sure the bottom 2 inches are plain (no text, no logos) where the legs will go. If you print over that, you’ll have to cut it off, and it will mess up the balance.
Step 4: Print Like a Pro (No Home Printer Disasters)
Let’s be real: your home inkjet printer isn’t gonna cut it for a full-size standee. The ink will smudge, the paper will fade, and it’ll cost more to print at home than to go to a local print shop (or use a vendor like mine). Here’s what to look for in a print service:
- Large format printing: This is the only way to get a 4-foot wide standee. Regular printers can only do 8.5×11 or 11×17, so you’ll have to tile the design (print it in sections, then tape them together). Tiling works, but it leaves visible seams that make your standee look cheap. Large format printing is seamless, so it looks like one big solid piece.
- UV or latex ink: These inks are waterproof, fade-resistant, and don’t smudge. If you use regular solvent ink, it might smell like chemicals (annoying in a closed conference hall) or fade by the end of the day. I always recommend latex ink for standees—small price difference, way better quality.
- Ask about mounting: Some print shops offer to mount your printed design onto corrugated board for a small fee. That’s worth it if you’re not great at DIY. I’ve seen too many people try to glue a print to a board and end up with bubbles or wrinkles.
Step 5: Setup Tips (Make It Fast, Make It Clean)
You’ve got your standee printed, your legs cut—now it’s time to put it together. Here are a few hacks I tell my team to avoid rushing:
- Lay out all parts before you start. No one wants to hunt for a glue stick or a screwdriver when the conference is starting in 10 minutes. I keep a small kit in my standee boxes with extra dowels, double-sided tape, and a box cutter.
- Test the stand outside before you go to the venue. AC, crowd, and uneven floors can make a stand that worked in your garage tip over. Take it to a park, set it up on grass (uneven surface, like some conference floors), and give it a nudge. If it doesn’t move, it’s good to go.
- Bring extra parts. I always tell clients to bring an extra leg, a roll of double-sided tape, and a small tube of glue to the venue. Stuff breaks—someone might step on a leg, or a corner might tear. Having backups saves you from panicking mid-conference.
Now, a quick reality check: why would you go through all this hassle when you can order a custom standee from a supplier who’s already done all the work? I run a paper standee business, and my clients tell me they save 3+ hours of setup time, no broken parts, and way better quality than DIY. But if you’re set on DIY, the steps above will help you make a standee that works.

Wait—one last thing. A lot of people ask: can I reuse my paper standee? Yeah, if you’re careful. Take it apart, store it in a flat box, and don’t fold it. Fold creases will make it look wrinkled when you set it up again. I’ve had clients use the same standee for 4+ conferences—just print a new design on top if you want to change it.
Gift Boxes If you’re gearing up for a conference, and DIY sounds like more work than you want, or you just want a pro-quality standee that’ll make your booth stand out, reach out. I work with teams of all sizes—from small startups to big corporations—and I’ll make sure your standee is stable, eye-catching, and ready to go by setup day. No hidden fees, no weird jargon, just a good product that works for your event.
References
- Event Industry News. (2022). Guide to Conference Display Materials. Event Industry Media Group.
- Printing Industries of America. (2021). Large Format Printing Best Practices for Event Displays.
- Corrugated Manufacturing Association. (2020). Rigid Paper Board for Event Signage Applications.
- The Balance Small Business. (2023). How to Build Stable Display Stands for Booths.
Kunshan Deco POP Display Co., Ltd.
Kunshan Deco POP Display Co., Ltd. is one of the most professional paper standee manufacturers and suppliers in China. Welcome to wholesale high quality customized paper standee at low price from our factory. For free sample, contact us now.
Address: No.288 Ruian Road, Bacheng Town, Kunshan City, Jiangsu Province PRC
E-mail: nimo.wang@decodisplay.com.cn
WebSite: https://www.popdisplaystands.com/